The Inland DB-100 Diamond Band Saw is the perfect saw for intarsia, free form, and even cabbing preforms. Saws hundreds of minerals, from Acanthite to Zircon. Increase your yields on valuable rough with accurate preforms cut right out of the middle of a piece! Improve your faceting results by cutting along the veils for cleaner finished gems.
Key Features:
Comes with one diamond blade for sawing agates, opals, glass, stone, and most other hard materials.
The optional WoodCut and MetalCut blades saw wood, plastics, fiberglass, leather, non-ferrous metals, printed circuit boards and more.
Replaceable BladeSert blade guides make the most intricate cuts simple. The upper blade/drip guide is adjustable for varying material thickness.
The coolant system provides a continuous, regulated flow of clean coolant to the diamond blade when wet sawing. Uses water for coolant to avoid messy oil clean-up.
The spring-loaded tension system, molded into the frame, insures proper wheel alignment, simple blade setup, and perfect tracking hour after hour, and enhances blade life.
The work surface is made of machined
aluminum 9" x 10". Drain channels funnel coolant into the internal drain system for a clean, clear view while sawing.
The frame, cover, and water reservoir are molded entirely from structural grade thermoplastic.
All frame and interior support walls are extra thick for maximum strength and durability.
The rigid housing absorbs and deadens sawing and motor sounds for quiet operation. The plastic construction makes it extremely light weight and easy to handle, so you can take it with you on the road!
Construction: Injection molded, structural grade thermoplastic.
Motor: Permanent magnet, speed controlled, up to 2800 Rpm.
Torque: 48 oz.-in.
Work surface: 9" x 10"
Size:18" high x 10" deep x 12" wide.
Shipping Weight: 11lbs.
Throat Depth: 4.75" (12 cm)
Cutting Depth: Maximum material thickness: 3" (7.6cm)
Minimum Radius: 3/16" (.5 cm)
Maximum Radius: 4.75" (12 cm)
Cutting Speed: Dependent on material type and thickness. Up to 12"/minute (30.5 cm/minute)
Two Year Full Confidence Warranty
230/240V versions available for most countries
This item ships from the factory and normally ships in 3 business days. At times parts delays may increase that time. We will contact you if there is any expected delay.
Shipping is by UPS Ground for a flat rate charge of $12.50.
We recommend that you order this item as a single order. Due to shopping cart limitations Flat Rate Shipping will only be a shipping option if you order this item by itself. If you order other items at the same time shipping will be based on a beginning weight of 20 pounds plus the weight of all additional items. This will drastically inflate your shipping cost. The weight cost will be adjusted down to the cost of shipping the only the additional items.
Due to Inland Lapidary's negotiated UPS Ground rates, if you choose any other shipping method the shipping charges will dramatically increase. If you choose a shipping method other than UPS Ground then we will contact you to approve cost of the additional charge for the shipping method you choose.
|
|
